7
TQBM0483
1[Í] Switch the main unit from on to standby
or vice versa (> 17)
2 [INPUT] Select the input source (> 17)
3 [SETUP] Select the setup menu (> 20)
4 [SOUND] Select the sound menu (> 19)
5 [ -PAIRING]
≥ Select the Bluetooth
®
device as the source
(> 17)
≥ Bluetooth
®
pairing (> 18)
≥ Disconnecting a Bluetooth
®
device (> 18)
6[i VOL j] Adjust the volume of this system
(> 17)
7 [MUTE] Mute the sound (> 17)
8[4][OK][3] Select and confirm the option
∫ Before using for the first time
Remove the insulation sheet A.
≥ Dispose of the insulation sheet responsibly after
removing it.
∫ To replace a button-type battery
Battery type: CR2025 (Lithium battery)
≥ Set the button-type battery with its (i) mark
facing upward.
∫ About remote control signal sensor
The remote control signal sensor is located on
the main unit.
≥ Use the remote control within the correct
operation range.
Distance: Within approx. 7 m directly in front
Angle: Approx. 20e up and down, 30e left and
right
Remote control
SOUND
INPUT
SETUP
OK
1
5
6
7
8
2
3
4
SC-HTB700-EGEBGNGW-TQBM0483_eng.book 7 ページ ２０１９年６月６日 木曜日 午前１０時２１分
To Next Page
Loading...
Need help?
General
