Panasonic SC-MAX8700 - Preparing the Remote Control

7
RQT0B21
7
4 Connect the AC power supply cord.
Do not use any other AC power supply cords except
the supplied one.
SC-MAX8700
SC-MAX4700
Conserving power
The system consumes a small amount of power even
when it is in standby mode. Disconnect the power
supply if you do not use the system.
Some settings will be lost after you disconnect the
system. You have to set them again.
Preparing the remote control
Use alkaline or manganese battery.
Install the battery so that the poles (+ and –) align with
those in the remote control.
To household
AC outlet
Insert the AC power
supply cord up to ,
a point just before the
round hole.
To household
AC outlet
ENGLISH
PP_RQT0B21-Y_en.fm Page 7 Monday, March 21, 2016 1:15 PM
offset printing