VQT5A86
14
Notes on Speakers
• Decrease the volume when the audio is distorted.
Specifications
Amplifier section
Output power
RMS Output Power
10 % total harmonic distortion
Front ch (both ch driven):
2 W per channel (1 kHz, 6 ≠, Boost Mode)
Total RMS power:
4W
FTC Output Power
1.0 % total harmonic distortion
Front ch (both ch driven):
110 Hz j 20 kHz 1.4 W per channel
(6 ≠, Boost Mode)
Total FTC power:
2.8 W
Speaker section
Front Speaker (L/R)
Type:
1 way 1 speaker system
Unit(s):
φ34 mm (1
3
/
8
q)
Impedance:
6 ≠
Passive Radiator:
φ50 mm (2q)
Bluetooth
®
section
Bluetooth
®
system specification:
Bluetooth
®
Ver. 3.0
Wireless equipment classification:
Class 2(2.5mW)
Supported profiles:
A2DP/AVRCP/HFP
Supported codec:
SBC
Frequency band:
2.4 GHz band FH-SS
Operating distance:
Approx. 10 m (33 ft.) Line of Sight
Prospective communication distance.
Measurement environment:
Hight 1.0 m (3.3 ft.)
Microphone section
Type:
Mono
Terminals section
DC IN:
USB Micro Type B
AUX input:
Stereo 3.5 mm (
1
/
8
q) jack
General
Power supply:
DC IN 5V 0.6A
Internal Battery 3.6 V (NiMH 1500 mAh)
Battery Life in Use:
Approx. 8 h (Normal Mode, Bluetooth
®
)
Approx. 1.5 h (Boost Mode, Bluetooth
®
)
Battery Charge Time:
Approx. 5 h
Dimensions (W k H k D):
120 mm k 53.8 mm k 120 mm
(4
23
/
32
q k 2
1
/
8
q k 4
23
/
32
q)
Mass (Weight):
Approx. 330 g (0.73 lbs)
Operating temperature range:
-10 oC to i50 oC (i14 oF to i122 oF)
Operating humidity range:
35% to 80% RH (no condensation)
Splash Proof:
IPX4 equivalent
Shock Proof:
76 cm (30q) Drop
Note
• Specifications are subject to change without notice. Mass and dimensions are approximate.
• Total harmonic distortion is measured by a digital spectrum analyzer.
SC-NT10_VQT5A86_eng.book 14 ページ ２０１３年６月６日 木曜日 午後１２時２２分
To Next Page
Loading...
