Panasonic SC-PM11

Specified disc number
This function makes it easier for you to select special CDs and tracks
from amongst those loaded in the player.
You can use this function to make recordings as well.
There are 3 CD/track selection modes.
l For playing back 1 track only from all loaded CDs
1 -Track mode (1 -TRACK)
l For playing back 1 CD only from all loaded CDs
l-Disc mode (l-DISC)
l For playing back 1 track on all loaded CDs
1 -Track All-Disc mode (1 -ALL)
Press [SELECTOR] to select “CD”.
q
Press [CD MANAGER] to select the desired mode.
Every time you press the button:
1 -TRACK - I-DISC - 1 -ALL
t...-- A
NORMAL
(OFF)
l-TRACK: Only one particular track is played.
1 -DISC:
The tracks on only one particular disc are played.
1 -ALL:
The same track numbers on each of the CDs are
played in succession.
(NORMAL: The original display is restored in about 3
seconds.)
El
Press [(CD 1) - (CD 5)] to select the disc you want.
m
This step is not required if l-ALL was selected in step q .
Press [HI/REW/V] or [AIFFIbbl] to select the de-
sired track.
This step is not required if l-DISC was selected in step q .
H
Press [CD b/II].
The selected track will start.
To stop play
Press [STOP I].
When playback ends
“NORMAL” will appear on the display for about 3 seconds, then the
CD MANAGER function wql turn OFF automatically.
During play in the l-ALL mode:
l It is not possible to skip back to a CD whose track has already
been played.
l If a CD does not have the designated track number, it is skipped
and play continues.
l You can use the CD Manager function together with repeat play.
l CD Manager function will be cancelled when you press the
[RANDOM] button.