REVMODE
VOLUME
Front side
Taoe direction
Press [A DECK OPEN].
The unit will come on automatically.
Insert the tape with the exposed tape facing down.
Close the holder by hand.
Tape direction is automatically set to “w”.
El
Press [REV MODE] to select the reverse mode.
Every time you press the button:
2 - Jz--c:1
CI
z : One side is played.
21 : Both sides are played.
Cz:, : Both sides are played repeatedly until [STOP
n
] is
pressed.
R
Press [TAPE 4 b] to start playback.
Every time you press the button; 4j tf @
@ : The forward side (front side) will play.
+J : The reverse side will play.
0
A
Adjust the volume.
To
stop tape playback
Press [STOP
n
].
One-touch play
When the system is OFF and a tape is already inserted, play starts
automatically when you press [TAPE 4 b].
1 Cassette tape selection and care
The unit can correctly play the following types. It identifies the type
automatically.
Normal position/TYPE I
/
Hiah DositioniTYPE II
/
) Metal position/TYPE IV 1
0 Tapes exceeding 100 minutes are thin and can break or get
caught in the mechanism.
0 Tape slack can get caught up in the mechanism and should be
wound up before the tape is played.
l
Endless tapes can get caught up in the deck’s moving parts if used
incorrectly. Use tapes appropriate to this unit’s auto-reverse
mechanism.