Panasonic SC-PMX3DB - DAB Features and Settings; DAB Presetting Channels; DAB Signal Quality Check; Automatic Clock Adjustment

RQTV0273
11
ENGLISH
Presetting
Presetting
Presetting channel
Presetting channel
Up to 20 channels can be set.
1
Press [4/ ] or [¢/ ] to select a station.
2
Press [PROGRAM].
3
Press the numeric buttons to select a channel.
4
To preset more stations, press [PLAY MODE] to select
“STATION” and then repeat steps 1 to 3.
Note
You cannot preset stations when the station is not broadcasting or
when you are selecting a secondary service.
Selecting a preset channel
Selecting a preset channel
1
Press [PLAY MODE] to select “PRESET”.
“PGM” is displayed.
2
Press [4/ ] or [¢/ ] or numeric buttons to select a
channel.
Listening to the secondary service
Listening to the secondary service
Press the [DAB SECONDARY] to select the secondary service.
“
” is displayed if there is a secondary service broadcast.
The secondary services are selected each time the button is
pressed. The primary service is returned to after the last secondary
service.
Display
Display
Press [DISPLAY] to select the display.
Each time you press the button:
Turning automatic clock adjustment
Turning automatic clock adjustment
function on
function on
To adjust the time information during DAB broadcasting and
automatic time adjustment.
1
Press [DAB MENU] to enter menu mode.
2
Within 10 seconds, press [ 3/4, ALBUM ] to select “CLOCK
ADJ.” and then press [OK].
3
Within 10 seconds, press [3/4, ALBUM] to select “ADJ ON”
and then press [OK].
Select “ADJ OFF” to turn the automatic clock adjustment function
off.
To exit
Press [DAB MENU] again.
Checking the DAB signal quality
Checking the DAB signal quality
To improve reception by adjusting the antenna while monitoring
signal quality on the display.
1
Press [DAB MENU] to enter menu mode.
Note
“NO INFO” appears if no stations are memorised. If this occurs,
adjust the antenna and try Auto scanning or change the Auto
scan frequency range.
2
Within 10 seconds, press [ 3/4, ALBUM ] to select “ANT,
CHECK” and then press [OK].
3
Press [ 3/4, ALBUM ] to select the frequency.
To exit
Press [DAB MENU] again.
Note
In order to enjoy the new stations after adjusting the antenna, it is
necessary to perform Auto scanning to update the station memory.
PMX3DB_EB_EN.indd 11PMX3DB_EB_EN.indd 11 6/18/08 9:49:38 AM6/18/08 9:49:38 AM