16
Basic play
RQTX0105
Basic play
Preparation
To display the picture, turn on your TV and change its video input mode.
[Note]
≥ DISC CONTINUES TO ROTATE WHILE MENUS ARE DISPLAYED. To preserve the unit’s motor and your TV screen, press [∫] (Stop) when you are
finished with the menus.
≥ Total title number may not be displayed properly on iR/iRW.
Using the main unit
VOLUME
OPEN CLOSE
SELECTOR
12
3
4
MEMORY
5
, + VOLUMEEXCHANGE
5 DISC
SELECTOR
123 45
POWER
TUNE
Start play.
≥ Tur n [`, i VOLUME] to
adjust the volume.
≥ You can enjoy surround
sound when you press
[ÎPLII] on the remote
control to turn on Dolby Pro
Logic II (➜ 28).
(Stop)
Select “DVD/CD”.Turn on the unit.
Press to skip.
Press and hold to
– search during play
– start slow-motion play during pause
≥ Press [1] (Play) to start normal play.
Open all the disc trays.
≥ To select a desired tray (➜ below, Selecting the desired tray).
≥ Press [<OPEN/CLOSE] again to close all the disc trays.
Load the disc.
≥ Load double-sided discs so the
label for the side you want to play is
facing up.
≥ Press [EXCHANGE] to load discs
one by one.
≥ For DVD-RAM, remove the disc
from its cartridge before use.
≥ Do not:
– Load more than one disc per tray.
– Push or pull out the tray by hand.
Label
facing up
Press to select a disc directly.
≥ You can also select the disc using the remote
control (➜ 17, Selecting a disc).
Selecting
the desired
tray
Press [<OPEN/CLOSE] again to close the tray.
5 DISC
SELECTOR
123 45
OPEN CLOSE
Change
discs
without
interrupting
playback
During play,
≥ All trays are opened (except the tray that the disc
is playing).
≥ Press [EXCHANGE] to close the top tray. Press
again until all the trays are closed.
EXCHANGE
SC-PT760-960P-PC_RQTX0105-P_eng (PX).book Page 16 Thursday, February 28, 2008 3:38 PM
To Next Page
Loading...
