EasyManua.ls Logo

Panasonic SC-UA90

Panasonic SC-UA90
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
TQBJ2140
D:\Publishing\Panasonic\SC-UA90.70\SC-UA90 GS.GW TQBJ2140 En.fm
Selecting a preset station
1 Press [PLAY MENU] repeatedly to select
“TUNE MODE”.
Or touch [8] on the unit to select “PRESET”. Continue
with step 3.
2 Press [Y, U] to select “PRESET” and then press
[OK].
3 Press the numeric buttons, [2/3] or
[5/6] to select the preset station.
Improving the sound quality
1 Press [PLAY MENU] repeatedly to select
“FM MODE”.
2 Press [Y, U] to select “MONO” and then press
[OK].
To cancel, select “STEREO”.
“MONO” is also cancelled when you change the
frequency.
To memorise the setting
Continue with step 4 of “Manual presetting” (~10).
Checking the signal status
Press [DISPLAY].
Recording
This system can record up to 800 folders (maximum 999
tracks in an album) or a total of 8000 tracks, depending on
the available storage capacity of the internal memory or
the USB device in
USB B .
To check storage space
In the stop mode, press [DISPLAY] repeatedly.
Example:
Remaining recording time of the internal memory.
“UPDATE” is shown when the system is reading the
USB device.
“NO DEVICE” is shown if there is no USB device
connected to
USB B .
To select where recordings are kept
1 Press [SETUP] repeatedly to select “REC TO?”.
2 Press [Y, U] to select “MEMORY” or “USB B” and
then press [OK].
Note:
All recordings are in “.mp3” format.
You cannot do recording when you are using random
playback mode or in the optical input source.
The DJ function or Karaoke function is switched off when
you start recording.
Repeat playback mode is cancelled during recording.
A new album is added each time you do a recording.
The sequence of album may change after the recording.
The recordings are kept in a folder named “REC_DATA” in
the USB device or the internal memory.
USB status indicator blinks in red during USB recording.
Internal memory status indicator blinks in red during internal
memory recording.
Basic recording
1 Select the source you want to record.
CD-DA
Prepare the disc playback mode.
Make sure the disc is stopped.
Radio
Tune in to the radio station.
AUX
Connect and play the equipment (~17).
FM–––– The FM signal is weak.
The system is not tuned in to a station.
FM ST The FM signal is in stereo.
FM MONO “MONO” is selected as the “FM MODE”.
The FM signal is in monaural.
Record all
tracks
Select “OFF PLAYMODE” (~9).
Record a
specified track
Select “1-TRACK” (~9).
SC-UA90 GS.GW TQBJ2140 En.fm Page 11 Tuesday, August 7, 2018 9:42 AM

Related product manuals