Need help?Do you have a question about the Panasonic SC-ALL2 and is the answer not in the manual?
General| Speaker type | 1-way |
|---|---|
| Tweeter diameter | 80 mm |
| Number of speakers | 1 |
| Audio output channels | 1.0 channels |
| Impedance | - Ω |
| Frequency range | - Hz |
| RMS rated power | 40 W |
| Headphone out | Yes |
| Connectivity technology | Wired & Wireless |
| Product type | Mono portable speaker |
| Product color | Black |
| Recommended usage | Universal |
| Audio formats supported | AAC, FLAC, MP3, WAV |
| Power source type | AC |
| AC adapter frequency | 50/60 Hz |
| AC adapter input voltage | 100 - 240 V |
| Power consumption (standby) | 1 W |
| Power consumption (typical) | 22 W |
| Quantity per pack | 1 pc(s) |
Weight and Dimensions| Depth | 120 mm |
|---|---|
| Width | 110 mm |
| Height | 174 mm |
| Weight | 4200 g |
Operation of the standby/on switch and indicator.
How to adjust the volume using the control switches.
Instructions for connecting the AC mains lead to power the unit.
Guide to configuring network settings via an internet browser.
Instructions for network setup using WPS button or PIN code.
Steps for connecting the unit to a network using a LAN cable.
Entering network credentials for connection.
Steps to reset network settings to factory defaults.
Alternative method using a PIN code for WPS connection.
Using apps like "Panasonic Music Streaming" for network audio.
Designating the unit as the audio output device.
Notes on using the unit as DLNA speakers.
Launching the app and choosing music for playback.
Specific instructions for streaming music via Spotify.
Designating the unit as the audio output for online music.
General guidance for other online music services.
Launching the streaming application.
Steps to stream audio from the unit to other AllPlay speakers.
Launching the radio app and choosing a station.
Saving the selected station to a preset number.
How to play back a previously saved preset channel.
Guide to connecting devices using the Bluetooth menu.
Step-by-step process for pairing Bluetooth devices.
Reconnecting a previously paired Bluetooth device.
How to disconnect an active Bluetooth connection.
Steps to pair SC-ALL2 units for rear surround sound.
Configuring the unit as a left or right surround speaker.
Instructions for updating firmware using the Panasonic Music Streaming app.
Steps to perform the firmware update on the unit.
Methods for silencing or snoozing an active alarm.
Checking the strength of the Wi-Fi signal.
Steps to reset the unit to its original factory settings.
Solutions for the unit failing to power on.
Resolving sound distortion issues when using AUX input.
Indicates a unit fault requiring repair.
Suggests updating the unit's firmware.
Troubleshooting steps when Bluetooth pairing fails.
Solutions for connection issues with Bluetooth devices.
Addressing issues where audio is not transmitted via Bluetooth.
Resolving sound interruption, skips, or noise during Bluetooth playback.
Actions to take if firmware update fails.
Troubleshooting network connectivity issues.
Solutions for issues with selecting the unit for audio output.
Troubleshooting sound interruptions due to interference or network issues.
To Next Page