EasyManuals Logo

Panasonic SC-ALL2 User Manual

Panasonic SC-ALL2
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #42 background imageLoading...
Page #42 background image
- 42 -
As a factory default, this unit will turn to standby mode automatically if
there is no sound and it is not being used for approximately 20 minutes.
To cancel this function
1 Touch and hold [DISP] and [6] for at least 4 seconds.
2 Touch [VOL –] or [VOL +] to select “OFF”.
3 Touch [DISP] to confirm the setting.
To turn the function on, select “On” in step 2.
About one minute before the unit turns off by this function, “A_OFF” is
displayed. Touch any switch to cancel it.
When connected to a Bluetooth
®
device, the function does not work.
This setting cannot be selected when network standby is on. If network
standby is set to on, this function will also be set to “On”. To change the setting,
set the network standby to “OFF”. (l 16)
Auto off function

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Panasonic SC-ALL2 and is the answer not in the manual?

Panasonic SC-ALL2 Specifications

General IconGeneral
Speaker type1-way
Tweeter diameter80 mm
Number of speakers1
Audio output channels1.0 channels
Impedance- Ω
Frequency range- Hz
RMS rated power40 W
Headphone outYes
Connectivity technologyWired & Wireless
Product typeMono portable speaker
Product colorBlack
Recommended usageUniversal
Audio formats supportedAAC, FLAC, MP3, WAV
Power source typeAC
AC adapter frequency50/60 Hz
AC adapter input voltage100 - 240 V
Power consumption (standby)1 W
Power consumption (typical)22 W
Quantity per pack1 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth120 mm
Width110 mm
Height174 mm
Weight4200 g

Related product manuals