Panasonic SC-ALL2 User Manual

- 28 -
You can preset up to 6 channels.
≥ A station previously stored is overwritten when another station is stored
in the same channel preset.
Preparation
≥ Make sure that the network is connected to the Internet.
≥ Connect a device with an “AllPlay Radio” app installed to the same
network as this unit.
1 Turn this unit on.
≥ Check that the network indicator (blue) lights up.
– If the network indicator is blinking in blue and red, wait until the blinking
stops.
2 Start the app “AllPlay Radio”, and select a station to playback.
≥ Always use the latest version of the app.
3 Touch and hold one of [1] to [6] on the unit for at least
4 seconds to preset the selected station.
e.g.,
“P1” blinks 3 times when [1] is selected.
Presetting stations
(Only when playback using internet radio app)
This unit is compatible with the Qualcomm
®
AllPlay™ Radio powered by
TuneIn.
You can preset stations when playback using internet radio app “AllPlay Radio”.
Qualcomm
®
AllPlay™ Radio powered by TuneIn is a product of Qualcomm Connected
Experiences, Inc.

Panasonic SC-ALL2 Specifications

General

Speaker type	1-way
Tweeter diameter	80 mm
Number of speakers	1
Audio output channels	1.0 channels
Impedance	- Ω
Frequency range	- Hz
RMS rated power	40 W
Headphone out	Yes
Connectivity technology	Wired & Wireless
Product type	Mono portable speaker
Product color	Black
Recommended usage	Universal
Audio formats supported	AAC, FLAC, MP3, WAV
Power source type	AC
AC adapter frequency	50/60 Hz
AC adapter input voltage	100 - 240 V
Power consumption (standby)	1 W
Power consumption (typical)	22 W
Quantity per pack	1 pc(s)

Weight and Dimensions

Depth	120 mm
Width	110 mm
Height	174 mm
Weight	4200 g