- 27 -
2 Start the app “Panasonic Music Streaming”.
≥ Always use the latest version of the app.
3 Go to the “Music Source”.
≥ The available music sources from this system will be listed on your device,
under the device name for this system.
4 Select your desired music source from the list.
5 The device will start to read the selected music source’s
information from this system.
≥ This system will change to the selector mode for the selected music source.
≥ Depending on the selected music source, playback may start. If a content
list appears on your device, select the desired content to start playback.
6 To stream this system’s audio to the other speakers powered
by AllPlay
1 From “Select Speaker”, select “ ” next to the device name for this
system.
2 Select the speakers to group.
≥ You can change the speaker mode setting for SC-ALL2 to left or right
channel to make stereo pairing.
≥ The number of speakers powered by AllPlay that can perform playback at
the same time differs depending on the situation of use.
≥ When you turn off one of the speakers powered by AllPlay, other
speakers in the same group may stop the playback.
≥ This system will be displayed as “Panasonic ALL2” if the device name is not
set.
≥ When enjoying video contents with this function, the video and audio output
may not be synchronised.
≥ If music is streamed to other speakers powered by AllPlay for more than
8 hours, the other speakers powered by AllPlay will automatically stop playing
the music. (The specifications are subject to change without notice.)
≥ This function will be cancelled when an alarm is activated. (l 43)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
