Panasonic SC-ALL2 User Manual

- 26 -
You can use the app “Panasonic Music Streaming” (l 21) to stream this
system’s music source (Bluetooth
®
/AUX source, etc.) to other speakers
powered by AllPlay.
Preparation
≥ Complete the network settings. (l 12)
≥ Prepare the desired audio source on this system (e.g. turn on the
connected device, etc.).
≥ Install your device with the app “Panasonic Music Streaming”.
≥ Connect your device and your speakers powered by AllPlay to the same
network as this system.
1 Turn this unit on.
≥ Check that the network indicator (blue) lights up.
– If the network indicator is blinking in blue and red, wait until the blinking
stops.
Streaming music on this system to other speakers
powered by AllPlay
e.g.,

Panasonic SC-ALL2 Specifications

General

Speaker type	1-way
Tweeter diameter	80 mm
Number of speakers	1
Audio output channels	1.0 channels
Impedance	- Ω
Frequency range	- Hz
RMS rated power	40 W
Headphone out	Yes
Connectivity technology	Wired & Wireless
Product type	Mono portable speaker
Product color	Black
Recommended usage	Universal
Audio formats supported	AAC, FLAC, MP3, WAV
Power source type	AC
AC adapter frequency	50/60 Hz
AC adapter input voltage	100 - 240 V
Power consumption (standby)	1 W
Power consumption (typical)	22 W
Quantity per pack	1 pc(s)

Weight and Dimensions

Depth	120 mm
Width	110 mm
Height	174 mm
Weight	4200 g