Panasonic SC-ALL2 User Manual

- 44 -
∫ When an alarm is activated
The indicators on the top panel of the unit blink fast.
Turning the alarm off
≥ If snooze is not set:
Touch any key on the unit to turn off the alarm.
≥ If snooze is set:
– Touch any key on the unit to enter snooze mode.
(The indicators on the top panel of the unit blink slowly.)
– During snooze mode, touch [ ]
§
1
or [Í/I]
§
2
on the unit to turn off the alarm.
§1 The unit will be off when the alarm is turned off with
[].
§2 The unit will be on when the alarm is turned off with
[Í/I].

≥ When you turn on an alarm, [ ] indicator will light up.
≥ When the current alarm is turned off, [ ] indicator goes off if you have not
turned on any other set alarm. (If another set alarm has been turned on, [ ]
indicator will light up.)
≥ When no operation is performed during the alarm activation, the alarm will be
off after approximately 1 hour.
≥ When an alarm is activated with preset channel, the playback condition will
depend on the connection environment.

Panasonic SC-ALL2 Specifications

General

Speaker type	1-way
Tweeter diameter	80 mm
Number of speakers	1
Audio output channels	1.0 channels
Impedance	- Ω
Frequency range	- Hz
RMS rated power	40 W
Headphone out	Yes
Connectivity technology	Wired & Wireless
Product type	Mono portable speaker
Product color	Black
Recommended usage	Universal
Audio formats supported	AAC, FLAC, MP3, WAV
Power source type	AC
AC adapter frequency	50/60 Hz
AC adapter input voltage	100 - 240 V
Power consumption (standby)	1 W
Power consumption (typical)	22 W
Quantity per pack	1 pc(s)

Weight and Dimensions

Depth	120 mm
Width	110 mm
Height	174 mm
Weight	4200 g