Panasonic SC-ALL2 User Manual

- 12 -
Network settings
You can stream music from a device on the network by using the
Qualcomm
®
AllPlay™ smart media platform or DLNA feature. To use
these features, this unit must join the same network as the device.
Qualcomm
®
AllPlay™ smart media platform is a product of Qualcomm Connected Experiences, Inc.
≥ Please update the unit’s firmware after the network settings are complete. ( l 38)
Choose a network setting method from the following.

≥ The setting will be cancelled after the set time limit. In that case, try the setting
again.
≥ To cancel this setting in the middle, touch [Í/I] to turn off the unit.
“Using an Internet browser” (l 13)
≥ You can access this unit’s network settings from the Internet
browser on your smartphone or tablet, etc.
“Using WPS (Wi-Fi Protected Setup™)” (l 17)
≥ If your wireless router supports WPS, you can set up a
connection by either pressing the WPS button, or entering the
WPS PIN code.
“Using a LAN cable” (l 19)
≥ You can make a stable connection to the network with a LAN
cable.

Panasonic SC-ALL2 Specifications

General

Speaker type	1-way
Tweeter diameter	80 mm
Number of speakers	1
Audio output channels	1.0 channels
Impedance	- Ω
Frequency range	- Hz
RMS rated power	40 W
Headphone out	Yes
Connectivity technology	Wired & Wireless
Product type	Mono portable speaker
Product color	Black
Recommended usage	Universal
Audio formats supported	AAC, FLAC, MP3, WAV
Power source type	AC
AC adapter frequency	50/60 Hz
AC adapter input voltage	100 - 240 V
Power consumption (standby)	1 W
Power consumption (typical)	22 W
Quantity per pack	1 pc(s)

Weight and Dimensions

Depth	120 mm
Width	110 mm
Height	174 mm
Weight	4200 g