- 8 -
Network indicator illumination
The below illustrates the network indicator illumination patterns.
Network indicator Description
Illumination: blue/red Blinks alternately
≥ The unit is carrying out an internal
process.
– Wait for approximately 1 minute
before the blinking stops.
– Do not disconnect the AC mains lead.
Doing so may cause malfunction or
damage.
Illumination: blue Blinks slowly
≥ The unit is ready for network setup.
(l 12)
Blinks
≥ The unit is waiting for the WPS
PUSH connection. (l 17)
Blinks fast
≥ The unit is waiting for the WPS PIN
code connection. (l 17)
To Next Page