Panasonic SC-ALL2 User Manual

- 48 -
Cannot turn on the unit.
≥ After connecting the AC mains lead, wait about 10 seconds before
turning on the unit.
Humming heard during playback.
≥ There are cords of other appliances or fluorescent light near the unit’s
AC mains lead. Turn the appliances off or keep them away from the AC
mains lead.
The sound is distorted when using the AUX IN jack.
≥ High level of input signal distorts the sound. Turn down the volume of
the connected device to reduce the input signal.
The network indicator does not stop blinking in blue and red.
≥ The unit needs to be repaired. Consult your dealer.
The unit does not work as described in the Operating Instructions.
≥ Update the unit’s firmware. (l 38)

Panasonic SC-ALL2 Specifications

General

Speaker type	1-way
Tweeter diameter	80 mm
Number of speakers	1
Audio output channels	1.0 channels
Impedance	- Ω
Frequency range	- Hz
RMS rated power	40 W
Headphone out	Yes
Connectivity technology	Wired & Wireless
Product type	Mono portable speaker
Product color	Black
Recommended usage	Universal
Audio formats supported	AAC, FLAC, MP3, WAV
Power source type	AC
AC adapter frequency	50/60 Hz
AC adapter input voltage	100 - 240 V
Power consumption (standby)	1 W
Power consumption (typical)	22 W
Quantity per pack	1 pc(s)

Weight and Dimensions

Depth	120 mm
Width	110 mm
Height	174 mm
Weight	4200 g