Panasonic SC-ALL2 User Manual

- 32 -
This function allows you to connect a paired Bluetooth
®
device when this
unit is in standby mode.
≥ This unit will be turned on automatically when you connect a paired
Bluetooth
®
device.
– If this function is set to “On”, the standby power consumption will increase.
1 Touch and hold [ ] and [1] for at least 4 seconds.
2 Touch [VOL –] or [VOL +] to select “On”.
3 Touch [DISP] to confirm the setting.

≥ To turn the function off, select “OFF” in step 2.
≥ The factory default is “OFF”.
Bluetooth
®
standby

Panasonic SC-ALL2 Specifications

General

Speaker type	1-way
Tweeter diameter	80 mm
Number of speakers	1
Audio output channels	1.0 channels
Impedance	- Ω
Frequency range	- Hz
RMS rated power	40 W
Headphone out	Yes
Connectivity technology	Wired & Wireless
Product type	Mono portable speaker
Product color	Black
Recommended usage	Universal
Audio formats supported	AAC, FLAC, MP3, WAV
Power source type	AC
AC adapter frequency	50/60 Hz
AC adapter input voltage	100 - 240 V
Power consumption (standby)	1 W
Power consumption (typical)	22 W
Quantity per pack	1 pc(s)

Weight and Dimensions

Depth	120 mm
Width	110 mm
Height	174 mm
Weight	4200 g