Panasonic SC-ALL2 User Manual

- 41 -
Touch [DISP].
Each time you touch [DISP], the display changes as follows:
≥ During playback of a preset channel, the current preset channel number will be
shown for a few seconds when you touch [DISP].
– When you touch [DISP] repeatedly, the display changes as follows:
You can change the brightness of the display and indicators.
1 Touch and hold [DISP] for at least 4 seconds.
2 Touch [VOL –] or [VOL +] to change the setting.
3 Touch [DISP] to confirm the setting.

≥ If “d: 1” or “d: 2” is selected, the display and indicators will brighten when you
perform some operations.
Changing the display mode
Dimmer function
Display Brightness
d: 0
d: 1
d: 2
Bright
Dim
Blank display Clock display / “--:--”
Blank display Clock display / “--:--”
Preset channel
number
Preset channel
number

Panasonic SC-ALL2 Specifications

General

Speaker type	1-way
Tweeter diameter	80 mm
Number of speakers	1
Audio output channels	1.0 channels
Impedance	- Ω
Frequency range	- Hz
RMS rated power	40 W
Headphone out	Yes
Connectivity technology	Wired & Wireless
Product type	Mono portable speaker
Product color	Black
Recommended usage	Universal
Audio formats supported	AAC, FLAC, MP3, WAV
Power source type	AC
AC adapter frequency	50/60 Hz
AC adapter input voltage	100 - 240 V
Power consumption (standby)	1 W
Power consumption (typical)	22 W
Quantity per pack	1 pc(s)

Weight and Dimensions

Depth	120 mm
Width	110 mm
Height	174 mm
Weight	4200 g