Panasonic SC-ALL2 User Manual

- 7 -
Control reference guide
1 Display
2 Network indicator (l 8, 9)
3 Internet radio preset channel
switches [1] to [6] (l 28)
(These switches are without
illumination.)
4 Display switch and indicator [DISP]
5 Alarm switch and indicator [ ]
6 AUX switch and indicator [AUX]
7 Bluetooth
®
switch and indicator
[]
8 Network switch and indicator
[NET]
Enter WPS pairing mode (l 17) /
firmware update mode (l 38)
9 Standby/on switch and
indicator [Í/I]
Touch to switch the unit from on to
standby mode or vice versa. In
standby mode, the unit is still
consuming a small amount of
power.
10 Volume control switch and
indicator [VOL –]/[VOL +]
Adjust the volume (0 (min) to
50 (max))
§ These switches work just by
touching the marks. Each time you
touch the switch, there will be a
beep sound. The beep sound can
be set to off. (l 45)
3
45678
910
12
※
※※※※※
※※
Top view

Panasonic SC-ALL2 Specifications

General

Speaker type	1-way
Tweeter diameter	80 mm
Number of speakers	1
Audio output channels	1.0 channels
Impedance	- Ω
Frequency range	- Hz
RMS rated power	40 W
Headphone out	Yes
Connectivity technology	Wired & Wireless
Product type	Mono portable speaker
Product color	Black
Recommended usage	Universal
Audio formats supported	AAC, FLAC, MP3, WAV
Power source type	AC
AC adapter frequency	50/60 Hz
AC adapter input voltage	100 - 240 V
Power consumption (standby)	1 W
Power consumption (typical)	22 W
Quantity per pack	1 pc(s)

Weight and Dimensions

Depth	120 mm
Width	110 mm
Height	174 mm
Weight	4200 g