Panasonic SC-ALL2 User Manual

- 23 -

≥ This system will be displayed as “Panasonic ALL2” if the device name is not
set.
≥ When playing back music from the DLNA server (PC with Windows 7 or later
installed, smartphone, Network Attached Storage (NAS) device, etc.), add the
contents and folder to the libraries of the Windows Media
®
Player, the
smartphone, or the NAS device, etc.
– Playlist of Windows Media
®
Player can play back only the contents that are
stored in the libraries.
≥ When this system is selected as DLNA speakers ( ):
– The volume control on the unit may not apply to the app.
– Playback control using a progress bar on playback screen may not work.
– The volume level applied to speakers powered by AllPlay will not be
reflected.
– If the system is selected as output speakers by another device, the music
source is changed to the new device. However the former device’s display
may not change.
≥ About supported format, refer to “Audio support format” (l 53, 54).
– File formats that are not supported by your DLNA server cannot be played.
≥ Depending on the contents and the connected equipment, playback may not
be performed properly.
≥ Ensure to stop playback on your device before turning it off.

Panasonic SC-ALL2 Specifications

General

Speaker type	1-way
Tweeter diameter	80 mm
Number of speakers	1
Audio output channels	1.0 channels
Impedance	- Ω
Frequency range	- Hz
RMS rated power	40 W
Headphone out	Yes
Connectivity technology	Wired & Wireless
Product type	Mono portable speaker
Product color	Black
Recommended usage	Universal
Audio formats supported	AAC, FLAC, MP3, WAV
Power source type	AC
AC adapter frequency	50/60 Hz
AC adapter input voltage	100 - 240 V
Power consumption (standby)	1 W
Power consumption (typical)	22 W
Quantity per pack	1 pc(s)

Weight and Dimensions

Depth	120 mm
Width	110 mm
Height	174 mm
Weight	4200 g