6
RQT9670
Control reference guide
1 Standby/on switch (Í/I)
Press to switch the unit from on to standby
mode or vice versa. In standby mode, the unit
is still consuming a small amount of power.
2 Adjust the volume of the speakers
3 Select the input source
“TV”#“BD/DVD”#“AUX”
^------------- “”(-----------}
4 Remote control signal sensor (> 7)
5 Input selector indicators
§1
A TV indicator
Lights green when the TV is the audio
source
B BD/DVD indicator
Lights amber when the device connected
to the BD/DVD terminal is the audio
source
C AUX indicator
Lights amber when the device connected
to the AUX terminal is the audio source
D Bluetooth
®
indicator
Lights blue when the Bluetooth
®
device is
the audio source
6 Audio format indicators
§1
E Dolby Digital indicator
Lights when Dolby Digital is the current
audio format
F DTS indicator
Lights when DTS is the current audio
format
G PCM indicator
Lights when PCM (2ch, Multi-channel) is
the current audio format
7 WIRELESS LINK indicator (> 21)
1 AC IN terminal (> 20)
2 Speaker terminals (> 20)
3 TV terminal (> 19)
4 BD/DVD terminal (> 19)
5 AUX terminal (> 19)
6 Active subwoofer on/off button
§1 The indicators will also blink in various conditions (> 28)
§2 The I/D SET button is only used when the main unit is not paired with the active subwoofer (> 27)
Main unit and active subwoofer (Front)
Main unit
Active subwoofer
Main unit and active subwoofer (Rear)
1
2134
6
SPEAKERS
6
R L
DIGITAL
AUDIO
IN
TV
(OPT1)
BD/DVD
(OPT2)
AC IN
AUX
R
L
5
SC-HTB351_RQT9670_mst.book Page 6 Thursday, December 29, 2011 1:39 PM
To Next Page
Loading...
