11
LSQT1561
Quick Guide
∫ Charging the battery
1 Connect the AC cable to the AC adaptor
and the AC outlet.
2 Insert the battery into the AC adaptor by
aligning the arrows.
∫ Inserting the battery
Push the battery against the battery holder
and slide it until it clicks.
∫ How to turn on the power
While pressing the lock release button A, set
the mode dial to , , or .
≥ Align with the status indicator B.
≥ To turn off the power, set the mode dial to OFF.
∫ Inserting an SD card
1 Open the LCD monitor.
2 Open the SD card slot cover then insert
the SD card into the card slot.
3 Securely close the SD card slot cover.
SDR-H79P-LSQT1561_mst.book 11 ページ ２００９年２月１２日 木曜日 午後４時２１分
To Next Page
Loading...
