24
LSQT1561
Preparation
Before using
4
Inserting/removing an SD
card
Caution:
If the SD card is inserted or removed while the power is on, this unit may malfunction or the data
recorded on the SD card may be lost.
1 Rotate the mode dial to OFF.
≥ Check that the status indicator has gone off.
2 Open the LCD monitor and then open the SD card slot cover.
3 Insert/remove the SD card.
≥ Press the SD card straight in as far as it will go.
≥ Press the center of the SD card and then pull it straight out.
4 Securely close the SD card slot cover.
SDR-H79P-LSQT1561_mst.book 24 ページ ２００９年２月１２日 木曜日 午後４時２１分
To Next Page
Loading...
