To Next PageTo Next PageWhy does my Panasonic Digital Camera turn off automatically?
If your Panasonic Digital Camera turns off automatically, turn the power back on to resume recording. To prevent this, set the power save function to [OFF].
Why is the auto focus not working on my Panasonic SDR-S100?
If the auto focus function on your Panasonic Digital Camera is not working: * Ensure auto mode is selected for automatic focus adjustment. * Be aware that certain subjects and surroundings may interfere with auto focus; try manual focus mode instead. * Note that using MagicPix shifts the focus to manual mode.
Why is my Panasonic Digital Camera not recognized by my computer?
If your Panasonic Digital Camera isn't recognized by your PC when connected via USB, try these steps: 1. Install the necessary driver and check the connections. 2. Ensure the camera is not in motion picture playback mode. 3. Try a different USB terminal on your PC. 4. Verify that your operating environment is compatible. 5. Turn on the power to the camera.
What to do if my Panasonic Digital Camera screen is frozen?
If the screen of your Panasonic Digital Camera is frozen and no operation can be performed, turn off the power. If it won't turn off, press the [RESET] button. Alternatively, remove and reinsert the battery, or disconnect and reconnect the AC adapter, then turn the power back on.
What to do if my Panasonic SDR-S100 is not operating normally?
If your Panasonic Digital Camera is powered on but not operating correctly, try pressing the [RESET] button. If that doesn't work, remove the battery or disconnect the AC adapter, wait about 1 minute, then reinsert the battery or reconnect the adapter. Wait another minute before turning the power back on.
Why does my Panasonic SDR-S100 battery drain so fast?
If the battery of your Panasonic Digital Camera runs down quickly, try the following: * Charge the battery with the AC adapter. * Be aware that ambient temperature affects battery performance; it drains faster in cold environments. * If the battery life remains short even after a full charge, the battery may be worn out and need replacement.
Why is my Panasonic Camcorder not recognized by the PC even when connected by the USB cable?
If your Panasonic Camcorder isn't recognized by your PC via USB, install the driver and check the connections. Ensure the unit isn't set to motion picture playback mode. Try another USB terminal on the PC, verify the operating environment, and make sure the camcorder is powered on.
What to do if “PUSH THE RESET SWITCH.” is displayed on my Panasonic Camcorder?
If your Panasonic Camcorder displays “PUSH THE RESET SWITCH,” remove the SD card and press the [RESET] button with the projecting part of the hand strap.
What to do if my Panasonic Camcorder indication disappears and the screen is frozen?
If your Panasonic Camcorder's screen freezes, turn off the power. If that doesn't work, press the [RESET] button. Alternatively, remove and reinsert the battery, or disconnect and reconnect the AC adapter. Then, turn the power back on.
General| Brand | Panasonic |
|---|---|
| Model | SDR-S100 |
| Category | Digital Camera |
| Language | English |
