13
VQT2L35
≥ Press the power button to turn off the power. (l 21)
Install the battery by inserting it in the direction shown in the figure.
Inserting the battery
Removing the battery
Be sure to hold down the power
button until the status indicator
goes off. Then remove the battery
while supporting the unit to prevent
it from dropping.
Move the battery release lever in
the direction indicated by the
arrow and remove the battery
when unlocked.
A Insert the battery until it clicks and locks.
SDRS50&H85GN-VQT2L35_mst.book 13 ページ ２００９年１２月２９日 火曜日 午前１０時３０分
To Next Page
Loading...
