97
VQT2L35
With a PC
Using with a PC
2
If using Mac
≥ VideoCam Suite 3.0 is not available for Mac.
≥ SDXC memory cards cannot be used on Mac.
≥ iMovie’09 supported. For details about iMovie’09, please contact Apple Inc.
∫ Operating environment
≥ Even if the system requirements mentioned in these operating instructions are fulfilled,
some PCs cannot be used.
≥ The USB equipment operates with the driver installed as standard in the OS.
≥ Supplied CD-ROM is available for Windows only.
∫ Copying still pictures on PC
1 Connect this unit to a PC via the supplied USB cable.
≥ The USB function selection screen will appear.
2 Use the joystick to select [PC], then press the centre of the joystick.
3 Double-click [CAM_SD] displayed on the desktop.
[CAM_SD] and [CAM_HDD] are displayed on the desktop.
≥ Files are stored in [100CDPFQ]/[101CDPFS] folder etc. in the [DCIM] folder.
4 Using a drag-and-drop operation, move the pictures you want to
acquire or the folder storing those pictures to any different folder on
the PC.
∫ To disconnect USB cable safely
Drag [CAM_SD] disk icon to the [Trash], and then disconnect the USB cable.
≥ [CAM_SD] and [CAM_HDD] are displayed on the desktop.
PC Mac
OS Mac OS X 10.5.8
Mac OS X 10.6
CPU Power Mac G5 Dual 2.0 GHz or higher
iMac G5 1.9 GHz or higher
Intel
®
-based Mac
RAM 512 MB or more
Interface USB port
SDRS50&H85GN-VQT2L35_mst.book 97 ページ ２００９年１２月２９日 火曜日 午前１０時３０分
To Next Page
Loading...
