Panasonic SDR-S50 - Page 26

26
VQT2L35
[ALERT SOUND]
Starting and stopping of recording and
power on/off can be confirmed with this
sound.
2 Beeps for 4 times
When an error occurs. Check the
sentence displayed on the screen.
(l 100)
[POWER LCD] (l 30)
[LCD SET] (l 30)
[TV ASPECT] (l 76)
[INITIAL SET]
Set to [YES] for changing the menu
settings back to the default condition.
(Settings for [MEDIA SELECT]
*2
,
[CLOCK SET] and [LANGUAGE] will
not be changed.)
[FORMAT MEDIA]
*2
(l 74)
[FORMAT CARD]
*3
(l 74)
[DEMO MODE]
This item is used to start the unit
demonstration.
(Only when the mode is at the
position)
If [DEMO MODE] is switched [ON]
when there is no SD card inserted, the
demonstration automatically starts.
If [DEMO MODE] is switched [ON]
when there is no SD card inserted and
while this unit is connected to the AC
adaptor, the demonstration
automatically starts.
If any operation takes place, the
demonstration is cancelled. However if
no operations take place for approx.
10 minutes, the demonstration
automatically starts again. To stop the
demonstration, set [DEMO MODE] to
[OFF] or insert an SD card.
[LANGUAGE] (l 24)
You can select the language on the
screen display and the menu screen.
SDR-S50
SDR-H85
SDRS50&H85GN-VQT2L35_mst.book 26 ページ ２００９年１２月２９日 火曜日 午前１０時３０分