15
6 Service Mode
Note:
The screens of the service mode are for SDR-T71PU.
For other models, refer to each screen of the service mode.
1. Indication method of the service menu
Set the mode switch " Recording" mode.
2. While keep pressing the "Intelligent auto/Manual" button and "Menu" button, hold left the Zoom Lever towards to "[ W ]" posi-
tion for more than 3 seconds until the top screen of the Service Menu being displayed.
Service mode menu
Note:
Do not using service mode except above table of Service Menu.
3. End method of the top screen of the service menu
Push the menu button to end the service mode, and then POWER OFF.
Screen
display
Contents Function
1 Factory settings Function to throw a product up in a factory shipment state
3 Self check execution Function to check self as for the state of eSD
4 Lock search history indication Display an error code for three histories saved in EEPROM
5 Power ON self check result dis-
play
Power ON self check (function to diagnose correct function of the device and interface
between devices) result display
10 Lock search history clear An error code for three histories in EEPROM is cleared
To Next Page
Loading...
