35
11 Factory Setting
Note:
The screens of the factory setting are for SDR-T71PU.
For other models, refer to each screen of the factory setting.
11.1. How to turn on the factory setting?
1. Indication method of the service menu
Set the mode switch " Recording" mode.
2. While keep pressing the "Intelligent auto/Manual" button and "Menu" button, hold left the Zoom Lever towards to "[ W ]" posi-
tion for more than 3 seconds until the top screen of the Service Menu being displayed.
3. Under the condition of the Item No."1" is yellow high lighted, press the "[RIGHT ] of joystick" button.
4. By pressing the "[UP ] of joystick" button, then press the "[center] of joystick" button.
5. After few seconds "END" is displayed on LCD monitor.Cutting of battery connection or AC power supply connection as a com-
pletion of the "FACTORY SETTINGS".
To Next Page
Loading...
