To Next PageTo Next PageWhat to do if my TV doesn't have composite inputs for my Panasonic DVR?
If your TV lacks composite or S-Video inputs for your Panasonic DVR, you can purchase an RF modulator to convert the composite video signal into an RF signal. RF modulators are available at most electronics stores.
How to program my Panasonic DVR remote for a TV/VCR combo?
If you're having trouble programming your TV/VCR combo with the Panasonic DVR remote, try the VCR setup codes. Some combo units may require a TV code for volume and a VCR code for other functions.
Why is the volume control not working on my Panasonic Showstopper PV-HS2000 remote?
To fix the issue where only one device's volume control code is sent on your Panasonic DVR remote, unlock the volume controls. Refer to “Changing Volume Lock” on page 42.
General| Recording Format | MPEG-2 |
|---|---|
| Remote Control | Included |
| Playback Format | MPEG-2 |
| Video Inputs | Composite, S-Video |
| Video Outputs | Composite, S-Video |
| Audio Inputs | Stereo RCA |
| Audio Outputs | Analog Stereo |
| Tuner | NTSC Analog |
Covers electrical safety, grounding, lightning protection, and power sources.
Addresses ventilation slots, heat sources, extreme locations, and temperature changes.
Details object/liquid entry, servicing, damage, parts, cord protection, and hard disk protection.
Explains caution symbols and provides essential warnings for safe operation.
How to connect antenna or cable TV signals to the Hard Disk Recorder.
Steps for connecting the Hard Disk Recorder's composite video output to a TV.
How to connect the device to a phone line for service updates and channel info.
Connecting the Hard Disk Recorder's output to the TV using S-Video or composite.
Detailed steps for connecting a cable box to the Hard Disk Recorder.
Connecting a cable box and A/V receiver to the Hard Disk Recorder simultaneously.
Step-by-step guide for connecting a satellite receiver using S-Video for better quality.
Connecting multiple source devices to the Hard Disk Recorder.
Comprehensive connection guide for four source devices to the Hard Disk Recorder.
Guide to positioning the IR blaster emitter for controlling external devices.
Connecting the device to a TV with only VHF/UHF inputs, possibly using an RF modulator.
Connecting both a satellite receiver and A/V receiver using S-Video.
Finalizing IR blaster setup by entering component codes for control.
Temporarily stop playback of live or recorded TV programs.
Navigate through recorded shows or live playback using rewind/fast forward.
Steps to record a program that is currently being broadcast live.
Setting up the device to record entire series or multiple episodes.
Adjusting quality, guarantee, and episode retention for recordings.
Using ReplayZones to record shows based on topical categories.
Creating custom theme channels by entering keywords for desired shows.
Locating all available episodes of a particular show within the guide.
How to schedule a recording for a future television program.
How to stop a scheduled recording before it begins or while in progress.
Transferring recorded shows to videotape for long-term archiving.
Adjusting the remote to control volume via a different component.
Programming the remote to operate TVs, cable boxes, and other devices.
How to find the correct remote code if your brand is not listed or codes fail.
