Panasonic SR-JHS109 - What to do when...; Adjusting Keep Warm Temperature; Addressing Burning Concerns; Stopping Buzzer Sounds

What to do when...
24 25
If burning is a concern.
1
Press
Menu Select
and set “◄” to “Quick”.
OOSelect “Quick” under “Pearl Rice” or “Jasmine
Rice”.
2
Press
Keep
Warm
.
You will not hear a beep.
Press .
You will not hear a beep.
Press
Keep
Warm
.
3
Press
Menu Select
.
Select “02”.
Press .
4
Press
Menu Select
.
Set to “So:Lo”.
After 10 seconds
( Setting ends automatically.)
To stop the buzzer sounding
(end sound) during cooking,
reheating and cleaning.
1
Press
Menu Select
and set “◄” to “Quick”.
OOSelect “Quick” under “Pearl Rice” or “Jasmine
Rice”.
2
Press and hold down
Keep
Warm
.
(for approximately 5 seconds)
OOThis change does not switch off the button sounds.
What to do when...
OOIf the suggestions on P. 22–23 do not bring about any improvement,
you can change the settings.
OOSteps 2, 3 and 4 must each be completed within 16 seconds.
When no operation is performed for 16 seconds, the display returns
to the current time. (Setting cannot be made.)
→ Please restart the procedure.
OOAfter the setting is completed, the display returns to the current time.
OOTo go back to the previous setting, follow the procedure again.
Menu Select
Keep
Warm
hour
min
Cooking Timer
Reheat
If you want to change the keep warm temperature.
(74→76→72)
1
Press
Menu Select
and set “◄” to “Quick”.
OOSelect “Quick” under “Pearl Rice” or “Jasmine
Rice”.
2
Press
Keep
Warm
.
You will not hear a beep.
Press .
You will not hear a beep.
Press
Keep
Warm
.
3
Press .
OOThe default setting is “74”.
4
When it smells
Press
Menu Select
.
Set to “76”.
After 10 seconds
(Setting ends automatically.)
When colour has changed or it is dry
Press
Menu Select
.
Set to “72”.
After 10 seconds
(Setting ends automatically.)