EasyManua.ls Logo

Panasonic SR-TMJ181 - Cleaning and Maintenance; Steam Cap Maintenance; Inner Pan and Components Cleaning

Panasonic SR-TMJ181
84 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
15
Cleaning and maintenance
Be sure to unplug and carry out these operations when
the appliance is cooled down.
Do not use objects such as benzene, thinners,
cleansing powder or metal scrubbers.
Wipe with a damp cloth.
Body / Outer Lid / Upper Frame
Do not use a dishwashing detergent.
Wash with a dishwashing detergent and
sponge and wipe off the external
surface of the inner pan.
Inner Pan
If an object has become stuck to the
Temperature Sensor / Cast heater
,
slightly polish it off using fine sandpaper
(of about # 600). Then wipe with a damp
cloth.
Temperature Sensor / Cast heater
Remove and clean after each use.
Dew collector
Accessoires
Measuring cup
Wash with a diluted dishwashing detergent and sponge.
Rice scoop Steaming basket
Steam cap
How to remove and clean
1. Pull off the steam
cap to remove it as
shown in the figure.
2. Remove the valve holder by turning
it counterclockwise. Wash and wipe
with a damp cloth.
Rubber gasket
DO NOT remove
3. Wipe the inside of the hole and
heating plate with a damp cloth.
Please do not remove the steam
cap when the appliance is in use.
Wipe with a damp cloth.
2. Put the steam cap into the hole of the
outer lid.
How to assemble the steam cap
1. Insert the valve holder into the steam cap
by aligning arrow mark of the holder
with the steam cap and turn it
clockwise until it seats properly.
SR-TMJ181_EN.indd Sec1:15SR-TMJ181_EN.indd Sec1:15 17/9/2556 10:58:1117/9/2556 10:58:11

Table of Contents

Other manuals for Panasonic SR-TMJ181

Related product manuals