3.1 Customizing Your Phone (Personal Programming)
124 User Manual
Clearing Features
You can reset the following features to their default settings.
This operation also cancels the AUTO ANS/MUTE status of both the Hands-free Answerback feature and
the Room Monitor feature.
To return features to default (Personal Programming Data Reset)
Which call waiting tone do you
prefer?
(Call Waiting Tone Type
Selection)
Tone 1
Tone 2
Which service do you prefer
when a calling party is
recording a message in your
mailbox?
(Live Call Screening [LCS]
Mode Set)
You can monitor the message
through the telephone speaker.
(Hands-free mode)
Only an alert tone is heard.
(Private mode)
•
*
If there are only 3 lines in the PBX, outside (CO) line numbers 4 through 8 cannot be
used.
• After the program number is entered, the program title and the selection are displayed.
• After you have changed a setting, the STORE button turns red and one beep is heard. If
the setting was invalid, 3 beeps are heard.
Feature Default Setting
Line Preference—Outgoing No line
Line Preference—Incoming A ringing line
Outside (CO) Line Ringing Selection Ring—all outside (CO) lines
Alternate Receiving—Ring/Voice Ringing (Tone Call)
Call Waiting Tone Type Selection Tone 1
Item Program Number Setting
5 1
5 2
1 1
1 2
Press STORE.Enter # .
Press PROGRAM.
Press PROGRAM.
To Next Page
Loading...
