Panasonic TA824 - Handling Call Waiting

1.4 During a Conversation
User Manual 53
1.4.4 Answering Call Waiting
– Answering Call Waiting in the PBX
– Answering Call Waiting from the Telephone Company
Answering Call Waiting in the PBX
During a conversation, a call waiting tone is heard through the speaker or handset when either an outside
(CO) line call is received, or another extension is letting you know that a call is waiting. You must activate
this feature to be able to use it (Default: Disable). To set Call Waiting, refer to "
1.7.3 Receiving Call Waiting".
You can answer the second call by
1) disconnecting the current call;
2) placing the current call on hold.
1. To disconnect the current call and then talk to the new party
PT
While hearing a call waiting tone
Talk to the
new party.
Press CO or
INTERCOM.
OR
(CO)
SLT
While hearing a call waiting tone
Off-hook.
On-hook.
Talk to the
new party.