1.4 During a Conversation
54 User Manual
2. To hold the current call and then talk to the new party
• A single line telephone (SLT) user cannot transfer a new call while holding the current call.
To transfer the new call, first park the original call using the Call Park feature, then go on-
hook and off-hook.
• You may have to enter the Call Hold feature number after pressing the Recall/hookswitch
on your SLT, depending on the SLT Hold Mode of your PBX. Ask your manager or dealer
about the mode assigned to your PBX.
PT
Press HOLD.
While hearing a call waiting tone
Disregard this step if both
parties are extensions.
Talk to the
new party.
Press CO or
INTERCOM.
OR
(CO)
SLT
While hearing a call waiting tone
Talk to the
new party.
Press Recall/
hookswitch.
D.Tone
Off-hook.
On-hook.
To Next Page
Loading...
