4.2 Feature Number Table
User Manual 147
2.1.3 Setting an Alarm for Other Extensions
(Remote Timed Reminder [Wake-up Call])
*
764
–To set extension no. + # + 76 + hour/minute
+ 0 (AM)/1 (PM) + 1 (one time)/2
(daily) + #
– To cancel extension no. + # + 76 + 2 + #
–To confirm extension no. + # + 76 + 3 + #
2.1.4 Erasing All Caller Information in the Common
Area (Incoming Call Log in the Common Area—
CLEAR ALL)
*
– To erase
70
#
2.1.5 Disregarding the Newest Call or Overwriting
the Oldest Call in the Common Area Call Log
(301st Incoming Call Logged in the Common
Area)
*
737
– To disregard the newest call 2 + #
– To overwrite the oldest call 3 + #
2.1.6 Recording Company Greeting Outgoing
Messages
*
722
–To record common outgoing message (OGM)
no. (01–24) + 1 + #
– To play back common OGM no. (01–24) + 2 + #
– To erase common OGM no. (01–24) + 0 + #
• * This feature is only available for the operator/manager.
Feature (While a busy, DND, or ringback tone is heard) Numbering
1.2.4 When the Dialed Party is Busy or There is No Answer
Sending a Call Waiting Tone to a Busy Extension (Busy Station Signaling
[BSS])
1
Joining an Existing Call (Executive Busy Override)/Calling an Extension That
Is Refusing Calls (DND Override)
2
Reserving a Busy Line (Automatic Callback Busy [Camp-on]) 6
Feature (While a dial tone is heard) Default Additional Number
To Next Page
Loading...
