1.4 During a Conversation
User Manual 51
Holding in a System Parking Zone (Call Park)
You can put a call on hold in a common parking zone of the PBX so that any extension can retrieve the
parked call. Up to 10 calls can be parked in the PBX.
To park a call
To retrieve (Call Park Retrieve)
• A single line telephone (SLT) user can hold either one intercom call or one outside (CO)
line call at a time, while a PT user can hold one intercom call and multiple outside (CO)
line calls. To hold multiple intercom calls, use the Call Park feature.
• You may have to enter the Call Hold feature number after pressing the Recall/hookswitch
on your SLT, depending on the SLT Hold Mode of your PBX. Ask your manager or dealer
about the mode assigned to your PBX.
Customizing Your Phone
• 3.1.3 Customizing the Buttons
Create or edit a Direct Station Selection (DSS) button.
• If you hear a busy tone when parking a call, the parking zone is unavailable. Dial
another parking zone number directly.
• If you hear a reorder tone when retrieving a parked call, there is no held call in that
location. Confirm the stored parking zone number.
• After you park a call, you can perform other operations.
Dial parking
zone number (0–9).
During a conversation
PT/SLT
On-hook.
Enter 22.
parking zone no.
22
C.ToneC.Tone &
D.Tone
Press HOLD or
Recall/hookswitch.
OR
Off-hook.
Enter 52. Dial stored parking
zone number
(0–9).
stored parking
zone no.
PT/SLT
Talk.
25
C.Tone
To Next Page
Loading...
