- 9 -
TC-14A04A / TC-20A04A
THE DAC CONTROL FOR GP3 CHASSIS FUNCTIONS AND ADJUSTMENTS
HOW TO ENTER IN THE SERVICE MODE:
1- Set the “OFF TIMER” to 30 minutes.
2- Press simultaneously RECALL key on the remote control and VOL(-) button on the unit.
After a couple of seconds, the expression “CHK” should appear on the right superior side of the screen. (To change
the memory data, press MUTE and VOLUME(
_
) simultaneously while the OSD is still on CHK1 mode. Key “4” moves
forward in the memory, and key “3” moves back in the memory
Note: To alter from CHK1 mode to CHK2, CHK3 or CHK4 modes, press key “2” to move forward and the key “1” to
move back, as illustrated below.
TO EXIT SERVICE MODE AND RETURN TO NORMAL MODE:
Press the “NORMAL” key on the remote control unit or turn off the TV.
CHK1 - OPTIONS
On CHK1 mode, it is possible to adjust the options below:
CHK1 mode table
Standard values
TC-14A04A
00
00
00
33
00
20
00
01
TC-20A04A
00
00
00
33
00
20
00
01
OPTION1
OPTION2
OPTION3
OPTION4
OPTION5
OPTION6
OPTION7
OPTION8
OPTION4
OPTION6
å
å
DIGITO LSB
DIGITO LSB
“4”
“4”
“3”
OPTION1 OPTION1 OPTION2 OPTION2
ááá
å ááá
DIGITO MSB DIGITO LSB DIGITO MSB DIGITO LSB
“4”
“3”
“3”
“4”
“3”
“3”
“4”
“3”
“3”
“4”
“3”
“3”
OPTION3
OPTION5
OPTION7
OPTION3
OPTION5
OPTION8
OPTION4
OPTION6
OPTION1
á
á
á
á
á
á
á
á
å
á
á
á
á
á
á
á
á
DIGITO MSB
DIGITO MSB
DIGITO MSB
DIGITO LSB
DIGITO LSB
DIGITO LSB
DIGITO MSB
DIGITO MSB
DIGITO MSB
“4”
“4”
“4”
“3”
“3”
“4”
“4”
“4”
“3”
“3”
“4”
“4”
“4”
“3”
“3”
Turn off
NORMAL MODE
OPTION CODE
SETTING
“
2
”
“
1
”
VCJ
ADJUSTMENT
CHK1
SERVICE MODE
“
2
”“
2
”
“
1
”“
1
”
PINCUSHION
ADJUSTMENT
WHITE BALANCE
ADJUSTMENT
CHK2 CHK3 CHK4
Note:
To select an option, type “4” to move forward
and “3” to move back.
After having selected the desired option, adjust
it by pressing the “VOL(
_
)” or “VOL(+)” keys.
Press “0” to memorize the adjustment.
CHK1 mode adjustments
On CHK1 mode it is possible to adjust the items of the table shown here.
Note:
To select an item, type “4” to move forward and “3” to move back.
After having selected the desired option, adjust it by pressing the “VOL(
_
)” or “VOL(+)”
keys.
Press “0” To memorize the adjustment.
To Next Page
Loading...
Need help?
General