2.3 Adjustment for White Balance
TOP PREVIOUS NEXT
Preparation:
1. Receive the white balance pattern and aging should have been performed over 30 minutes.
2. Set the picture menu to DYNAMIC NORMAL.
3. Degauss the CRT face.
4. Fix the CRT colour analyzer receiver unit to CRT face.
Adjustment of Low Light.
1. Adjustment Sub Bright, so that Y = 7.0 ± 1.0 nit.
2. Adjustment R-CUT OFF, so that X = 0.238 ± 0.010 nit.
3. Adjustment G-CUT OFF, so that Y = 0.229 ± 0.010 nit.
Adjustment of High Light
1. Adjustment Sub Bright, so that Y = 155 nit.
2. Adjustment R-Drive, so that X = 0.263 ± 0.010 nit.
3. Adjustment B-Drive, so that Y = 0.273 ± 0.010 nit.
TOP PREVIOUS NEXT
http://202.224.189.179/viewing/OT/TC-14Z88RQ/SVC/s0203000000.html10.02.2006 2:29:55
To Next Page
Loading...
