2.4 Adjustment for CRT CUT OFF
TOP PREVIOUS NEXT
Preparation:
1. Connect the oscilloscope probe to TPL5.
2. Screen VR min.
3. Set the data Sub Bright, Bright.
4. In service Mode at “Bright” dac press [5] in factory mode to enter vertical line and adjust by
volume down or up button.
5. Adjust “Screen VR” until 1-H Line appears.
TOP PREVIOUS NEXT
http://202.224.189.179/viewing/OT/TC-14Z88RQ/SVC/s0204000000.html10.02.2006 2:30:00
To Next Page
Loading...
