Panasonic TC-21Z88RB - Conductor Views; Schematic Diagram

Fig. 11
Notes:
1. Wedge A, B and C should be inserted following the sequence of 1,
2 and 3 shown in Fig. 11.
2. The wedges should be set 120° apart from each other.
3. Be certain that three wedges are firmly fixed and the Deflection
Yoke is tightly clamped in place. / Otherwise the Deflection Yoke
may shift its position and cause a loss of convergence and purity.
3. Conductor Views
4. Schematic Diagram
12