Panasonic TH-32LRH30U - Viewing Still Images from SD Card; SD Card Insertion and Data Selection; Photo Viewing and Slideshows

16
TH-32LRH30U
7 Disassembly and Assem-
bly Instructions
• To disassemble P.C.B., wait for 1 minute after power was off
for discharge from electrolysis capacitors.
• , , , , and marks indicate screw positions.
7.1. Removal of Rear Cover
1. Remove screws (×14 , ×4 , ×1 ) and then remove
the Rear Cover.
7.2. Removal of AC Inlet
1. Disconnect the connector (P1).
2. Remove 2 screws ( ).
3. Remove 1 screws ( ) and then remove the AC Inlet Assy.
7.3. Removal of Control Panel Assy
1. Remove 2 screws and then remove the Control Panel
Assy.
2. Disconnect the connector (K1).
7.4. Removal of P-Board
1. Remove 4 screws and then remove the Metal Cover and
the Barrier Metal Cover.
2. Disconnect the connectors (P1, P2, P5, P6, P7, P8).
3. Remove 2 hooks.
4. Remove 1 screws and then remove the P-Board from the
Bracket IP.
7.5. Removal of TA-Board
1. Remove 1 nut and then remove the lock washer and the
washer.
2. Remove 2 screws and then remove the Tuner Mount
Metal.