26
Side Panel Adjustment
2
Press to select the Side panel.
Press to select Off, Low, Mid, High.
Press to exit from Screensaver.
3
1
Do not display a picture in 4:3 mode for an extended period,
as this can cause an after-image to remain on the side panels
either side of the display field.
To prevent the appearance of such an after-image, illuminate
the side panels.
To display the Screensaver screen.
(Refer to the previous page, operation guide steps 1 and 2)
Notes:
• Setting the side panel to High mode for an extended period may result in occurrence of after-images.
• The side panels may flash (alternate black/white) depending on the picture being shown on the screen. In such an
occurrence, use the Cinema mode.
Off Low Mid High
R
Screensaver
Function
Mode
White bar scroll
Time Designation
Start Time
0 : 00
0 : 00
Side panel
High
Wobbling
Off
Peak limit
Off
Finish Time
Start
PRESENT TIME
10 : 00
side panel
4:3
Screen Display
after-images
Screensaver (For preventing after-images )
AB
Non picture area
This function may be applicable to the non-picture area.
Picture out Picture Picture and Picture
To Next Page
Loading...
