Panasonic TH-42PWD8WS - Adjustment Procedure; Driver Set-Up; Item; Preparation

9. Adjustment Procedure
9.1. Driver Set-up
9.1.1. Item / Preparation
1. Input a white signal of the RGB signal generator.
2. Set the picture controls: -
Picture menu: Standard
Color temperature: Middle
Picture: 25
Aspect: Full
Caution
1. First perform Vsus adjustment.
2. Confirmation of Vscn voltage should be performed after confirmation of Vad
adjustment.
When Vad=-90V, Voltage of Vscn is 30V ±3V.
9.1.2. Adjustments
Adjust driver section voltages referring the panel data on the panel data label.
41