Panasonic TH-42PX50U - Location of Controls; The Illuminated Remote Control Layout

6.16. Remove the SD-Board
(42inch)
1. Remove the screws (×2 ).
2. Slide the SD-Board to the left to disconnect from a coupler
(SC42 - SD42) on the SC-Board and remove a coupler
(SD46 or SC46).
3. Remove the flexible cables (SD1, SD2, SD3, SD4)
connected to the SD-Board, and remove the SD-Board.
6.17. Remove the SD-Board
(50inch)
1. Remove the screws (×3 ).
2. Slide the SD-Board to the left to disconnect from a coupler
(SC42 - SD42) on the SC-Board and remove a coupler
(SD46 or SC46).
3. Remove the flexible cables (SD1, SD2, SD3, SD4)
connected to the SD-Board, and remove the SD-Board.
16
TH-37PX50U / TH-42PX50U / TH-50PX50U