105
English
Play contents
For the above setting example, the following contents
will be played on repeat (loop).
1. 001_Introduction.jpg (
*
1)
2. 002_Contents_Video1.wmv (
*
2)
3. 003_Contents_Video2.wmv (
*
2)
4. 004_Contents_Video3.wmv (
*
2)
*
1: Played for the duration set in [Slide show
duration].
*
2: Played for the duration of the play time of the file.
Single Media Player (Type 2)
Files will be played in the order they were listed in a
scenario.
Scenario and file list
Scenario:
Enter [File name: Play time].
File list:
Unnecessary
Setting example
USB memory contents
scenario.dat
Introduction.jpg
Contents_Video1.wmv
Contents_Video2.wmv
Contents_Video3.wmv
scenario.dat (scenario)
Introduction.jpg:10
Contents_Video1.wmv:10
Contents_Video2.wmv:20
Contents_Video3.wmv:
Play contents
For the above setting example, the following contents
will be played on repeat (loop).
1. Introduction.jpg (10 seconds)
2. Contents_Video1.wmv (10 seconds)
3. Contents_Video2.wmv (20 seconds)
4. Contents_Video3.wmv (Played for the
duration of the play
time of the file)
Single Media Player (Type 3)
Files will be played in the order they were listed in a
scenario.
Scenario and file list
Scenario:
Enter [File definition: Play time].
File list:
Enter [File definition: File name].
Setting example
USB memory contents
filelist.dat
scenario.dat
Introduction.jpg
Contents_Video1.wmv
Contents_Video2.wmv
Contents_Video3.wmv
scenario.dat (scenario)
PHOTO_001:10
VIDEO_001:10
VIDEO_002:20
VIDEO_003:
filelist.dat (file list)
PHOTO_001:Introduction.jpg
VIDEO_001:Contents_Video1.wmv
VIDEO_002:Contents_Video2.wmv
VIDEO_003:Contents_Video3.wmv
Play contents
For the above setting example, the following contents
will be played on repeat (loop).
1. Introduction.jpg (10 seconds)
2. Contents_Video1.wmv (10 seconds)
3. Contents_Video2.wmv (20 seconds)
4. Contents_Video3.wmv (Played for the
duration of the play
time of the file)
Note
●
While the menu screen is not displayed, you can
skip to the next playback file with
, to the previous
playback file with , or play back again from the
beginning of the file with (Remote control operation
only).
●
[Multi display settings] supports 2×1, 1×2 and 2×2.
(see page 84)
■ USB memory contents check
You can run a USB memory contents check in [USB
media player settings] - [Scenario file check]. (see page
85)
If an error is present, the information is given with the
following details.
A(B): C
D
A: Name of the file with an error
B: Row with an error
C: Error code
D: Detail of the error
To Next Page
Loading...
