Panasonic th-49lf8w User Manual

Operating Instructions
FULL HD LCD Display For business use
Model No. TH-42LF8W
42-inch model
TH-49LF8W
49-inch model
TH-55LF8W
55-inch model
TH-42LF80W
42-inch model
TH-49LF80W
49-inch model
TH-55LF80W
55-inch model
English
Please read hese instructions before operating your set
and retain them for future reference.
TQBJ0922

Panasonic th-49lf8w Specifications

General

Screen Size	49 inches
Panel Type	IPS
Brightness	350 cd/m²
Response Time	8 ms
Refresh Rate	60 Hz
Aspect Ratio	16:9
Resolution	1920 x 1080
Viewing Angle	178°
Output Ports	Audio Out
Built-in Speakers	Yes
Input Ports	HDMI

Summary

Important Safety Notice

Safety Precautions

Precautions for use

Cautions when installing

Guidelines for safe and proper installation of the display unit.

Note regarding security

Wired LAN

Connections

AC cord connection and fixing

Video equipment connection

HDMI 1 and HDMI 2 terminals connection

DVI-D IN / DVI-D OUT terminal connection

PC IN terminal connection

VIDEO IN terminal connection

COMPONENT/RGB IN terminal connection

SERIAL terminal connection

IR IN/IR OUT terminal connection

AUDIO OUT terminal connection

USB terminal connection

DIGITAL LINK terminal connection (LF80 series only)

Identifying Controls

Main Unit

Identifies the controls and indicators on the main unit.

Remote Control Transmitter

Basic Controls

When the Unit is turned on for the first time

Selecting the input signal

Volume Adjustment

Sound mute On / Off

OFF TIMER

ASPECT Controls

Digital ZOOM

On-Screen Menu Displays

[Position] menu

[Sound] menu

[Picture] menu

[Setup] menu

Adjusting Position

Auto setup

Automatically corrects PC and RGB input position and size.

Sound Adjustment

Picture Adjustments

[Picture mode]

Picture Profiles

Saving profiles

Loading profiles

Editing profiles

Setup menu

Signal

Configures signal settings for various input types like HDMI, DVI, PC.

Screensaver (For preventing image retention)

Power management settings

No activity power off

Multi display settings

Network settings

USB media player settings

Function button settings

Options Adjustments

Options

Accesses various special functions and settings for the unit.

Input search

Failover/Failback

[Input change mode]

[Primary backup input]

[Secondary backup input]

Audio input select

Initial input

Initial VOL level

Maximum VOL level

PC auto setting

Off-timer function

Controller ID function

Serial ID function

LAN control protocol

Information timing

Using Network Function

Necessary environment for computers to be connected

Checks required for connecting a computer via LAN.

DIGITAL LINK Terminal connection (LF80 series only)

Precautions for use while connecting with a twisted pair cable transmitter

About installation / connection

Command control

Control Command via LAN

Communicates commands to the unit over a network.

When the WEB control administrator privileges password has been set (Protect mode)

PJLink protocol

Supported commands

PJLink security authentication

Connecting with LAN

Computer operation

Steps for operating the computer connected via LAN.

Using Web Browser Control

Before Using Web Browser Control

Prerequisites for using the web browser control function.

Computer Setup

Disables proxy and enables JavaScript for web browser control.

Change Password page

User account

Network config page

LAN settings

Configures network settings for the display.

[Browser Remote Control]

Operation page

USB Media Player

Function description

Displays still and motion pictures from USB memory.

Single Media Player

Multi Media Player

Preparation

Playing back the files

Example of setting in each mode

USB memory contents check

Network environment (Multi Media Player only)

Example of setting up LAN connection and IP address / Subnet mask

Starting / ending Media Player

For Single Media Player

For Multi Media Player

Resume Play function

ID Remote Control Function

Setting the remote control’s ID number

Steps to set the remote control's ID number.

Cancelling the setting of remote control’s ID number

Entering characters

Preset Signals

Video signal

PC signal

Shipping condition

Data Cloning

Data that can be copied

Copying the display data to the USB memory

Steps to copy display settings to a USB memory device.

Troubleshooting

Symptoms Check

Guide to diagnosing and resolving common picture and sound issues.

Specifications

Connection terminals