Panasonic th-49lf8w - Set up Timer

English
50
■ [Bezel H adjustment], [Bezel V adjustment]
Adjust the area of image hidden in the joint horizontally
and vertically respectively.
0-100
Display example
Setting value: 0
Displays the entire image including the joint area.
(Suitable when displaying character information on
PC.)
Setting value: 100
Does not display the image of the joint area.
(Suitable when displaying motion pictures.)
■ [Location]
Assign the multi display position.
Example:
[Horizontal scale] [10], [Vertical scale] [10]
A1 A2
....
....
....
....
....
B1 B2
.... ....
A9
B9
....
J1 J2 J9
I1 I2 I9
A10
B10
....
I10
J10
Select from A1 to J10.
●
The displayed content for setting changes
according to the settings for the [Horizontal scale]
and [Vertical scale].
Set up timer
Sets the program to turn the power on/off or switch video
inputs at the specified time. Up to 20 programmes can
be set.
Note
●
Set [Date and ime] before setting [Set up timer]. (see
page 51)
●
When multiple programs are set at the same time,
the program with the smallest program number is
enabled.
[Set up timer] - sub menu screen
Setting Example
Program 1 Every Monday 12:00
Power On Input: HDMI1
12:00
Set up timer
Program
Timer function
1
On
Power on
HDMI1
Day
Time
Power mode
Input
MONDAY
1
2
3
4
5
6
10:00 THURSDAY 2015/01/01
1 Set the program number.
2 To execute the program, set to [On].
The program is disabled when [Off] is set.
3 Set the day.
The program is executed every day when
[Everyday] is set.
4 Set the power On/Off.
5 Set the time.
Pressing
once changes time 1 minute.
Pressing continuously changes ime by 15
minutes.
6 Set the input.