English
88
Display status page
Click [Status]→[Display status].
This page displays the Display statuses established for
the items shown below.
Displays the type of Display.
Displays the firmware version of the Display main
unit.
Network status page
Click [Status]→[Network Status].
Displays the current configuration information of the
network.
Displays the configuration details of wired LAN.
Basic control page
Click [Display control]→[Basic control].
Power On/Off control
Use these to select the input signals
AUDIO mute
Switches aspect mode
Detail control page
Click [Display control]→[Advanced control].
Enter a command. Use the same command used for
the serial control.
Response from the unit is displayed.
Command is sent and run.
Note
●
After the settings are changed, it may take a while till
the display status is displayed.
Change Use name / Password page
Click [Change password].
Administrator
User
■ Administrator mode
Account
Current user name input field
Current password input field
New user name input field
New password input field
New password input field (re-enter for confirmation)
Button for executing password change
To Next Page
Loading...
